Revised Rotomolding Guide Refreshes the Case-Design Reference

The Association of Rotational Molders revised its design guide in 2026. The update gives case designers a current reference for process, materials and part geometry.

Illustrative editorial photo: Close-up of a factory production line with yellow components being assembled.

Source event: May 15, 2026. The Association of Rotational Molders announced a revised Design Guide for Rotationally Molded Plastic Parts in May 2026. Its overview says the guide covers process fundamentals, advantages, part-design principles and plastics used in rotational molding.

Use the guide at the drawing stage

A rugged case shell can be undermined by poorly planned corners, wall transitions, openings or hardware attachment zones. A design reference helps engineers review those issues before tooling is committed, when changes are less expensive.

Guidance is still general. The final part needs agreed material grade, tolerances, inspection points and tests with its intended equipment load. A supplier’s actual process and mold also affect the outcome.

  • Review the latest guide before finalizing wall and corner geometry.
  • Specify critical fit dimensions and material grade.
  • Test the finished packed case, not only a CAD model.

The manufacturing photograph is illustrative and not an ARM facility or certified case.

Source:

Association of Rotational Molders — revised design guide

Illustrative photograph: Pexels

Source: Association of Rotational Molders — revised design guide

Share this articleLinkedInFacebookXWhatsAppEmail